Rated
Voltage: A piezo buzzer is driven by square waves (V p-p).
Operating Voltage: For normal operating. But it is not guaranteed
to make the minimum SPL under the rated voltage.
Consumption Current: The current is stably consumed under the regular
operation. However, it normally takes three times of current at
the moment of starting to work.
Capacitance: A piezo buzzer can make higher SPL with higher capacitance,
but it consumes more electricity.
Sound Output: The sound output is measured by decibel meter. Applying
rated voltage and square waves, and the distance of 10 cm.
Rated Frequency: A buzzer can make sound on any frequencies, but
we suggest that the highest and the most stable SPL comes from the
rated frequency.
Operating Temp.: Keep working well between -30℃ and +70℃.
Rated Voltage 壓電式蜂鳴器以方波(V p-p)驅動
Operating Voltage 可正常工作的適用電壓範圍,但不保證低於額定電壓時仍能達到最低音壓
Consumption Current 正常發聲後,持續的消耗電流量.而啟動瞬間需要的電流,一般至少需要持續耗電流的三倍
Capacitance 陶瓷片的電容量,電容量愈大音壓易做大,但較耗電.
Sound Output 加以額定的電壓,方波,以Db表在距離10cm測得
Rated Frequency 蜂鳴器每一個頻率都仍有聲音,額定的頻率指建議使用的最大,且音壓一致性較好的頻點
Operating Temp. 能維持正常動作的溫度 –30--+70度
How to choose:
Driving
methods: AZ-xxxxS-x series with built drive circuit will be the
best choice when we cannot provide frequency signal to a buzzer,
it only needs direct current. Besides, there are different tone
nature for you to choose, such as continuous, fast pulse, and slow
pulse.
Dimension: Dimension affects frequency, small size result in high
frequency.
Voltage: Driven by square waves (V p-p), the higher voltage results
in the higher SPL.
Pin Pitch: The numerous spec. for the piezo buzzers lead to the
difficulty in finding a spec. in facsimile, therefore we suggest
that you can firstly choose a spec. with the same pitch and similar
frequency.